Microcement floor cost · 2026
what microcement actually costs in 2026.
Authentic microcement plaster (From $18/sqft) on walls and wet-area floors. SPC microcement-vinyl ($4.80–$8.50/sqft) on dry-area floors only. Wet areas: plaster only. For most homeowners, the cost-effective path is SPC floor + microcement wall — same aesthetic, fraction of the cost.
per-sqft pricing — at a glance
| System | Per sqft (installed) | Cure time |
|---|---|---|
| Authentic microcement plaster (walls + wet-area floors) | From $18 | 3–5 days |
| Microcement-look SPC vinyl plank | $4.80 – $8.50 | Same-day walkable |
| Cement screed (structural levelling) | $6 – $12 | 3–5 days |
per-scope plaster pricing
All prices derive from the $18/sqft anchor — walls everywhere, plus wet-area floors.
| Scope | Indicative price |
|---|---|
| Feature wall (~40 sqft) | From $788 |
| HDB common bathroom (full plaster — walls + floor) | From $3,288 |
| Master bathroom (full plaster — walls + floor) | From $4,388 |
| Condo master bathroom (premium fittings) | From $5,088 |
| Whole-room plaster (4 walls bedroom) | From $5,088 |
per-room SPC microcement-vinyl (dry areas only)
| Scope | Floor area | Indicative price |
|---|---|---|
| HDB 3-Room (dry areas) | ~520 sqft | From $2,500 |
| HDB 4-Room (dry areas) | ~800 sqft | From $3,800 |
| HDB 5-Room (dry areas) | ~1,080 sqft | From $5,200 |
| Condo 3-bed (dry areas) | ~1,150 sqft | From $6,400 |
the cost-effective path — spc vinyl floor + microcement walls
Now that you can see all rates side-by-side, the recommendation for most homeowners is the combination, not the purist route.
SPC microcement-vinyl on dry-area floors. Authentic microcement plaster on the walls and any wet-area floors. Same monolithic, jointless cement aesthetic at standing eye height — at a fraction of the cost, with almost no ongoing floor maintenance.
| Approach (4-Room HDB) | Indicative cost | Maintenance |
|---|---|---|
| All-authentic (plaster floor + plaster walls) | From $30,000+ | Re-seal every 3–5 years |
| Combination (SPC floor + plaster feature walls) | From $5,500 | Mop floor, walls untouched |
| All-vinyl (SPC floor + painted walls) | From $4,000 | Standard repaint cycle |
- Floors take all the wear. SPC's 0.5mm wear layer handles 15–20+ years of foot traffic. Plaster floors need re-sealing and show marks.
- Walls are where the aesthetic lives. A microcement feature wall is what people photograph. The floor just needs to match the tone — and SPC matches it well.
- One quote, one crew. Pico X Health supplies and installs both, finished on the same project visit.
what drives real microcement floor cost
- Specialist labour. 3–5 day install per zone. Hand-trowelled.
- Materials. Polymer resin + pigment + aggregate. Imported.
- Sealer. Two polyurethane coats minimum.
- Substrate. Cement screed needs to be flat and cured. Hacking existing tile adds cost.
what drives SPC microcement-vinyl cost
- Plank quality. 5mm SPC with 0.5mm wear layer is residential-grade. Thicker wear layer (commercial) costs more.
- Substrate condition. Float-over standard. Hollow tile or uneven floor adds prep.
- Skirting. Replace vs reuse.
our usual recommendation
SPC microcement-vinyl on dry-area floors only. Authentic microcement plaster on feature walls and inside the bathroom — walls and floor. Total for an HDB 4-Room: roughly from $4,588 (dry-area SPC floor + 1 feature wall) plus from $3,288 if you add a full-plaster common bathroom.
faq
why does authentic microcement plaster cost more than spc?
Microcement is hand-trowelled in multiple layers with a sealer cure — labour and finish quality cannot be automated. SPC microcement-vinyl is a factory-printed rigid plank that click-locks in a day. From $18/sqft for plaster versus $4.80–$8.50/sqft for SPC reflects that gap.
are these prices fixed?
They are 2026 indicative ranges based on real Pico X Health quotes. Unit-specific price depends on substrate, plank-edge length, and any required levelling.
what is the most cost-effective way to get the microcement look?
SPC microcement-vinyl on dry-area floors plus authentic microcement plaster on the feature wall (and any wet-area floor). Same monolithic, jointless cement aesthetic at standing eye height for a fraction of the cost, with almost no ongoing floor maintenance.